
|
Jandel 4Point Probe 헤드
Jandel 은 이미 전세계에 공급되어 있는 어느 모델에도 사용할 수 있는 고품질의 four-point probe head를 공급하고 있습니다. 이들 고성능 four-point resistivity probe head는 30년동안 OEM 으로도 공급하여 왔으며 많은 resistivity measurement system의 표준으로 되어 왔습니다.
|
Cylindrical Probe for use with: |
쟌델 멀티 포지션 웨이퍼 프로버, 수동형 프로브, 웨이퍼 매핑 등 에 적용 |
|
아래의 제품과 병용 |
Napson |
|
아래의 제품과 병용 |
ASM, PIE, Veeco AP150 (w/fell adaptor), Veeco FPP5000 (upside down-also w/fell adaptor), Parc-Amber 그외 |
|
아래의 제품과
병용 |
Prometrix, KLA/Tencor, CDE |
|
아래의 제품과 병용 |
Veeco FPP5000 (upside down-in Alessi adaptor), Veeco FPP100 (old model with force balance - also in Alessi adaptor), GRQ Instruments equipment |
|
아래의
제품과 병용 |
Kokusai , 구형 Napson |
Miniature Cartridge with 6-32 tapped holes 아래의
제품과 병용 |
Signatone, Magnetron, Chang Min |
|
|
다양한 고온/저온 엔지니어링에 적용 |
|
|
홀 이펙트(hall effect) 측정용 쟌델 l Square Array Probe |
PROBE SPACING |
25-50 mils by 5 mil increments: |
TOLERANCE |
+/-0.01 mm |
ARRANGEMENT |
Linear or Square array |
NEEDLES |
Solid Tungsten carbide Ø 0.40
mm (Ø 0.30 mm for close-spacing) |
OTHER MATERIALS |
50% osmium alloy tips available |
RADII |
12.5 μm min. to 500 μm max. polished with 2 μm diamond |
RETRACTION TO |
0.5 mm |
PLANARITY |
+/- 0.025 mm or better |
LOADS: |
|
CARTRIDGE (Preset) |
10g min. to 250g max. per needle. Not user adjustable |
CYLINDRICAL AND |
Low: 10-30g, Medium: 30-60g |
LEADS |
4-way cable Teflon insulated |
ELECTRICAL LEAKAGE |
1013 ohms resistance between needles at 100 volts |
Tel 031-479-4211/2
Fax 031-479-4213
Email JSi@JSiTS.com