Following tools are included in the JTK-17 Metric Tool Kits

Feeler gauge blades: .038-635mm
Hex blades (7): 1.27-5mm
Ignition wrenches (8): 4-9mm
Mini-nutdrivers (2): 3, 3.5mm
Nutdriver blades (10): 4-11mm
Pin punches (2): 1, 3mm
Rule, 15cm
Socket set, 1/4" drive (9): 4-12mm
Alignment tools (2)
Hammer, ball peen, 4 oz.
Handle, driver blades (2): 3-1/8, 4-1/8"
Hex key set 10 pcs, .028-5/32"
Hex key set (7): Fold up 2, 2.5, 3, 4, 5, 6, 8mm
Scribe/Awl 8"
Knife, electrician's
Mirror, inspection
Penlight
Pliers (6): diagonal cutter, 4-1/4"; diagonal cutter, 5-1/4"; groove joint, 10"; long nose, 4-3/4"; long nose with cutter, 6-3/4"; retaining ring, external/internal
Punch, center, 3/32"
Rule, stainless, 6"
Screwdriver, offset ratchet, Phillips/slotted
Screwdriver, Phillips No.0 x 2-1/2", pocket clip
Screwdriver, Phillips (3): No.1 x 3"; No.2 x 1-1/4"; No.2 x 4"
Screwdriver, slotted 3/32 x 2", pocket clip
Screwdriver, slotted (6): 1/8 x 4"; 1/8 x 8"; 3/16 x 3"; 1/4 x 1-1/4"; 1/4 x 4"; 5/16 x 6"
Screwdriver set, jeweler's, 7 pc.
Screwstarter, Phillips/slotted
Solder aid, fork and hook
Soldering iron, 115V*
Spring tool, pull
Spring tool, push
Tweezer, reverse action
Wire crimper/stripper
Wire stripper/cutter
Wrench, adjustable (2): 4"; 8"
Wrench set, ignition, 8 pc.
Tool case with pallets